
A standard homebuyer’s survey will tell you the roof is tired and the gutters need clearing. What it almost never tells you is the state of the electrics, because the surveyor doesn’t test them. For a house you’re about to spend a great deal of money on, that’s quite a gap.
Here’s how to size up a property’s electrics before you commit, and why a proper inspection is the cheapest insurance you’ll buy in the whole process.
What to look for on a viewing
You don’t need any equipment to pick up the obvious signs:
- The consumer unit. Find it. A modern metal board with individual breakers and RCD protection is a good sign. Rewirable fuses, a wooden back board or a plastic enclosure with no RCDs points to an installation that hasn’t been touched in a long time.
- Socket and switch styles. Round-pin sockets, Bakelite switches or surface-mounted cabling on old cleats suggest original wiring.
- Socket count. One socket per room and extension leads everywhere tells you the wiring predates modern living.
- Signs of DIY. Odd junction boxes, mismatched fittings, cables clipped along skirtings, a shed or garage fed by an extension lead.
- Paperwork. Ask the agent whether there are electrical certificates for any recent work, or a previous Electrical Installation Condition Report. Silence is an answer in itself.
Why get an EICR before you exchange
An EICR is a proper inspection and test of the fixed wiring by a qualified electrician, resulting in a report that classifies anything found by severity. For a buyer, it turns “the electrics look a bit old” into a specific, costed list. It tells you whether you’re looking at a few remedial items, a consumer unit upgrade, or a full or partial rewire, and it lets you decide with your eyes open.
Sellers are generally used to the request and it can be arranged around the survey. We’ve explained the process in detail in our EICR guide.
Using the findings
An unsatisfactory report isn’t a reason to walk away; most older homes will have something on the list. It is a reason to negotiate. A costed quote for the remedial work or rewire gives you a concrete figure to raise with the seller, and either the price moves or you go in knowing the budget.
It also shapes your plans. If the house needs rewiring, doing it before you move in and before you decorate is dramatically easier than living through it later; our guide to what to expect during a rewire explains why.
Old wiring isn’t always a problem, but sometimes it is
Older cable colours alone don’t fail an inspection. What matters is condition and safety: whether circuits are earthed, whether there’s RCD protection, whether the insulation is still sound. Some older installations test perfectly well. Others, particularly those with rubber-insulated cable or lighting circuits with no earth conductor, need replacing regardless of how tidy they look.
After you move in
If you didn’t get an inspection before completion, get one soon after, before you start decorating or fitting a kitchen. Everything is easier with a clear picture of what’s behind the walls.
DW Electrical Solutions carries out pre-purchase EICRs and any follow-on work across Hampshire, from Portsmouth and Fareham to Winchester and Southampton. NAPIT approved, with reports written in plain English. Get in touch to discuss your project.